• 香蕉视频91黄片,91香蕉视频污版,香蕉视频APP导航,九一香蕉视频下载

    Hello, Welcome to FCTEL Technology Co.,Ltd
    National service hotline:+086 0571-87007055/56/57 CN

    WE ONLY FOCUS ON TRANSMISSION AND ACCESS

    Products center

    Industrial rail 1 port Profibus-DP Multiplexer

    Type:FCP-P1G Message

    Description:Transmit 1 port Profibus DP interface over fiber optic;1 fiber optic interface; 1 Profibus DP interface.

    Product Description
            This series of equipment using large FPGA design, using the original technology, can support a channel Profibus-DP to fiber optic repeater, communication rate 0-12Mpbs. , IP40 protection grade, wavy aluminum reinforced case, 35mm DIN rail mounting, AC & DC (9~55V) wide power input, power supply redundancy and isolation protection. -40~75°C operating temperature range, able to meet the requirements of various industrial sites, providing convenient fiber optic communication solutions.
    Functional Properties
    ◆ The device is used in pair, the signal input terminal, a signal output terminal; 
    ◆ Provide 1 Profibus DP field bus, communication baud rate adaptive 9600-12Mbps; 
    ◆ Multimode/single mode fiber optional, multimode can transmit 2KM, single mode can transmit 20-120KM, ST/SC/FC interface is optional;
    ◆ With signal fault protection function; omnidirectional display of electrical interfaces and fiber operating conditions 
    ◆ Profibus DP interface anti-radar to IEC61000-4-5 (8/20μS). Differential mode: 6KV, impedance (2Ω); Common mode: 6KV, impedance (2Ω) standard;
    ◆ Support wide range of 9-48V AC and DC input, support internal isolation, redundant dual power input, power supply overload protection, anti-reverse protection；
    ◆ Meet the industrial four-level electromagnetic compatibility requirements;
    ◆ Super lightning protection function: lightning protection, anti-induction high voltage, anti-surge, etc；
    ◆ Fanless efficient heat dissipation, reducing repair time；
    ◆ IP40 enclosure protection level, can withstand the harsh environment；
    ◆ DIN 35mm rail or wall mount；
    ◆ Wide temperature type: working temperature -40 ° C ~ +85 ° C；
    ◆ All models are tested by 100% baking machine, warranty period: 5 years.
    Technical Parameters
    ◆ Fiber optic      
    Optical port: 1
    Optical fiber: single fiber and dual fiber
    Fiber Interface: FC/SC/ST/LC (SFP)
    Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single mode
    No relay transmission distance: 20~120Km
    Typical transmit power:
    Single mode 1310/1550nm: ≥-9dBm
    Multimode 850nm: -18dBm
    Multimode 1310nm: -25dBm
    Acceptable sensitivity range: -28dBm~- 40dBm
    ◆ Profibus DP interface   
    Standard：Support Profibus?DP standard
    Rate：9.6kBit/s、19.2?kBit/s、45.45kBit/s、 93.75k?kBit/s、187.5kBit/s、500kBit/s、 1.5MBit/s、6MBit/s?and?12MBit/s.
    Physical interface： 9-pin D-Sub jack connector with pin definitions in accordance with Profibus DP protocol specifications
    Rate setting: 9600-12Mbps/s automatic identification
    Signal delay (electrical port): ≤11Bit
    Terminal resistance: This unit does not have a terminating resistor, please connect as needed
    ◆ Working environment   
    Working temperature: -40℃—+85℃
    Storage temperature:  -40℃—+85℃
    Working humidity: 0%—95%（no condensation）
    MTBF：   ＞100,000 hours
    Application Scheme
    Industrial rail 1 port Profibus-DP Multiplexer
    
    网站地图